ACCESSORIES
Nitro On Road Engines

SPECIAL VENTURI
HIGH TORQUE - 3.5cc

REDS Racing High Torque venturis are available in 8.0, 8.5 and 9.0 mm and they feature a higher torque maintaining mid and top range power fuel consumption unchanged.
AIR FILTER
HIGH PROTECTION - 3.5cc

REDS Racing high quality material air filters for use on 3.5CC On Road Engines. Each air filter set is supplied with two air filters.
EFRA 2113
HIGH POWER AND TOP SPEED - 3.5cc

EFRA 2113 exhaust guarantees great mid and top power and good fuel economy. REDS 2113 is suitable for any type of track. It is advisable to combine the pipe with L manifold.
POWERBAND RPM
Low ●●●●●
Mid ●●●●●
High ●●●●●
MANIFOLDS 3.5cc
CONICAL XL, L or M

-
XL is recommended for short tracks where more bottom torque is required, top speed will be lower.
-
L is recommended for medium or standard tracks; it is a good compromise between torque and top speed.
-
M is recommended for tracks with long main straights and to achieve the highest top speed but lower bottom torque.
EFRA 2674
HIGH POWER - 2.1cc

EFRA 2674 exhaust guarantees great mid and top power and good fuel economy. Matched with S manifold the pipe is recommended for any tracks.
POWERBAND RPM
Low ●●●●●
Mid ●●●●●
High ●●●●●
MANIFOLDS 2.1cc
CONICAL M or S

-
M is recommended for short tracks where more bottom torque is required, top speed will be lower.
-
S is recommended for medium or standard tracks; it is a good compromise between torque and top speed.
GLOW PLUGS
TURBO SPECIAL GLOW PLUGS

The most technologically advanced glow plugs on the market.
REDS Racing Plugs are designed for professional racers with extremely modified engines.
TS7 - 3.5cc engines
T6F - 2.1cc engines
REDS Engine Bearing Tool Kit
PROFESSIONAL TOOL FOR ENGINE MAINTENANCE
REDS Engine Bearing Tool Kit set includes puller and presser for pulling out and pressing in front & rear engine bearings. The tool was developed for nitro racers that want to perform critical maintenance on their nitro engines.
The tool is available in two versions:
-
.12 engine tool for 7mm front and 12mm rear bearing Part # ENTL0002.
-
.21 engines tool with 7mm front and 14mm rear bearing Part # ENTL0001.